#3 Halyard Winch

I. Remove screw (#15) from inside top of drum (#13).

2.Remove drum (#13) from base (#1).

3. Remove brake screw (#4), swivel pin (#5), brake handle assembly (#6) by unscrewing from base (#1).

4. Remove anchor pin (#7) from base (#1) using small pointed object.

5. Remove brake band (#3) and ratchet ring (#8) from base (#1).

6. Inspect 2 pawls (#11) and 3 pawl springs (#12) on drum (#13). (Do not remove unless broken.)

7. Carefully wash all parts including inside of drum (#13).

8. Grease inside of drum (#13).

9. Oil 2 pawls (#11) on drum (#13).

10. Assemble brake band (#3) to base (#1).

11. Assemble anchor pin (#7) through brake band (#3) and onto base (#1), checking alignment of anchor pin hole with brake band hole.

12. Assemble brake screw (#4), swivel pin (#5), brake handle assembly (#6) through brake band (#3). (Do not tighten securely until winch assembly completed.)

13. Assemble ratchet ring (#8) onto drum (#13) noting correct position of pawls.

14. Assemble drum (#13), ratchet ring assembly (#8) to base (#1) noting the fitting of roll pin (#2) on top of base (#1) to hole in drum retainer (#10).

15. Assemble screw (#15) inside top of drum (#13) and tighten.